Satisfied Rem/Age Build

We recently received some information from a satisfied customer from Tennessee.  He recently purchased a Rem/Age system and had the following to say.

“I recently purchased a Rem/age system and wanted to respond. I’m extremely happy with your service as well as the simplicity of this outfit I purchased from you. This pictures is the group I shot yesterday with it and again just wanted to thank you for your service……… Jamie”

Thanks for the feedback Jamie and happy shooting!

Gene from Ohio

62nd Birthday 200 Yard Success

Thanks Gene for sending in the great photo and information regarding your recent Northland Shooters Supply build!

See what Gene had to say below.

“Got the rifle Thursday evening, mounted a Sightiron SIII 6×24-50 on NF rings and 20 MOA base. I loaded some new Lapua brass Saturday with 70 Gr Nosler B-Tips, with CCI 450’s and 28.5 Gr H4895 (mild but should be accurate). Went to Woodbury state range out east, 36 degrees Sunday with 7-10 mph wind and snowing while I shot this. Started at 50 yards, with 10 rounds, then went straight to 200 yards shot two groups. First one four rounds to get a spot to adjust from, then rounds # 15-16-17-18-19 & 20 went into this photo attached.

It was my 62nd birthday Sunday and this was special to me! I was very pleased and actually amazed as the B-tips usually shoot good but not really a match bullet. It has been over seven years since I pulled the trigger on a 6BR, I am really glad you had that rifle.” ~Gene

1000 Yard Shooting Testimonial of Recent Build

Thanks Jeff Miller for sending in these great photos and information regarding your recent Northland Shooters Supply build!

See below what Jeff had to say.

 

 

 

“This gun was a budget build on a savage short action using a 28 inch Criterion match grade barrel chambered in .243 Win. I also purchased the NSS precision barrel nut and NSS recoil lug from Northland. The stock is a Chote ultimate sniper. The gun really likes 105gr Hornady match bullets with a dose of 46 grains of H1000.”

20160216_100342_resized“The photo of the orange target is 24X24 and the circle in the middle (shown at the top of this post) is a CD disc size at 1000yd, after playing with windage and elevation I laid down 6 shoots measuring just over 5 inches.”

 

 

 

 

 

 

 

20151215_133320_resized“The prairie dog target was at 600 yards.  Couldn’t be happier with these results! The 7mm Saum I’m building now will be getting the same barrel.”

 

Northland Shooters Supply Company Update

Effective April 1, 2016, Northland Shooters Supply (NSS) has changed their management team structure and will be relocating to their new facility in Bismarck, ND.  This notification is to advise our customers that we are turning over the ownership and daily operations of NSS to James Kessler.  Despite the physical address of the business changing, the phone number for the business (763) 682-4296 will remain the same.  You will be able to reach the new owner (James) at this phone number.

James is an experienced hunter, shooter, and reloader and will do very well with the NSS product lines. James has been working behind the scenes for the last year and has been doing an outstanding job.  We thought very long and hard regarding who the successor would be for NSS and we are very excited to see James carry on the NSS name and customer service level that we have worked to achieve.

Everything is still business as usual and if you are an existing customer with an order you are currently waiting on, have no fear.  Orders placed prior to the business transition are still being processed on the timeline discussed during the time of your order placement.  When your order is ready to ship, your order will ship from the previous business location in Minnesota

We want to share a very special thank you to all of our customers.  You have made NSS a very enjoyable experience and we have been happy to serve you.  Thank you all.

Jim and Brenda Briggs

NSS Releases New 4-Inch (Stubby) Barrel Nut Wrench

The 4-inch heavy duty barrel nut wrench offers 33% increased rigidity.  The 4-inch wrench is offered for the standard square-notch barrel nut design. This design also incorporates a 1/2-inch cutout for using a ratchet, breaker bar, or a torque wrench to aid in the removal and installation of the NSS precision barrel nut.

The price for the 4-inch tool is $18.00.

4_INCH_WRENCH

NSS Releases New Tool for Installation of Rem/Age Barrel on Remington 700 Action without Gunsmithing

NSS Taper Loc Recoil Lug System

NSS is pleased to announce the release of their Taper Loc Recoil Lug System. NSS has been working with the latest modification to their Action Wrench, this modification will allow rifle builders that are using the Remington 700 models to install the NSS Rem/Age Barrels without having to notch or pin their receivers. This NSS Action Wrench update will allow you to install the NSS Heavy Duty Precision Ground Recoil Lug directly to your Remington 700 Action without any required gunsmithing.

The price for the Taper Loc Recoil Lug System is $25.00.  Note: The NSS Action Wrench is also needed for this system.

Please click on the link below for direction on how to use the NSS Taper Loc Recoil Lug System.

NSS Taper Loc Recoil Lug System Instructions