1000 Yard Shooting Testimonial of Recent Build

Thanks Jeff Miller for sending in these great photos and information regarding your recent Northland Shooters Supply build!

See below what Jeff had to say.

 

 

 

“This gun was a budget build on a savage short action using a 28 inch Criterion match grade barrel chambered in .243 Win. I also purchased the NSS precision barrel nut and NSS recoil lug from Northland. The stock is a Chote ultimate sniper. The gun really likes 105gr Hornady match bullets with a dose of 46 grains of H1000.”

20160216_100342_resized“The photo of the orange target is 24X24 and the circle in the middle (shown at the top of this post) is a CD disc size at 1000yd, after playing with windage and elevation I laid down 6 shoots measuring just over 5 inches.”

 

 

 

 

 

 

 

20151215_133320_resized“The prairie dog target was at 600 yards.  Couldn’t be happier with these results! The 7mm Saum I’m building now will be getting the same barrel.”

 

NSS Releases New 4-Inch (Stubby) Barrel Nut Wrench

The 4-inch heavy duty barrel nut wrench offers 33% increased rigidity.  The 4-inch wrench is offered for the standard square-notch barrel nut design. This design also incorporates a 1/2-inch cutout for using a ratchet, breaker bar, or a torque wrench to aid in the removal and installation of the NSS precision barrel nut.

The price for the 4-inch tool is $18.00.

4_INCH_WRENCH

NSS Releases New Tool for Installation of Rem/Age Barrel on Remington 700 Action without Gunsmithing

NSS Taper Loc Recoil Lug System

NSS is pleased to announce the release of their Taper Loc Recoil Lug System. NSS has been working with the latest modification to their Action Wrench, this modification will allow rifle builders that are using the Remington 700 models to install the NSS Rem/Age Barrels without having to notch or pin their receivers. This NSS Action Wrench update will allow you to install the NSS Heavy Duty Precision Ground Recoil Lug directly to your Remington 700 Action without any required gunsmithing.

The price for the Taper Loc Recoil Lug System is $25.00.  Note: The NSS Action Wrench is also needed for this system.

Please click on the link below for direction on how to use the NSS Taper Loc Recoil Lug System.

NSS Taper Loc Recoil Lug System Instructions