criterion 6xc

Chris S. of Texas sent us some photos of his 6XC RemAge build using a Criterion Barrels Inc. barrel.

Here are the specs on his barrel:

  • 26” Criterion Rem/Age-6XC- MTU contour- 7 twist with muzzle thread
  • NSS squared and trued barrel nut
  • NSS action wrench
  • NSS Taper Loc
  • MDT XRS chassis

Here is what Chris had to say about his build:
“My 6xc build is a Criterion 26” MTU set on to a blueprinted stainless Remington 700 short action. I bolted that into an MDT XRS chassis with the fore end weight. It has a Timney Calvin Elite Competition trigger and Area 419 hellfire brake on it. I am using a Harris bipod that mounts to a M-LOK rail I added from MDT. MDT 20 MOA base holds the Leupold Mark 5 3.5-18×44 with Seekins Precision rings. I repainted the stock with Brownell’s Aluma Hyde grey paint to make it look better. I use 107 Sierra MatchKing bullets loaded 0.008” off the lands, 38.5 grains of H4350 powder in Peterson Brass with CCI 200 primers. The target is a 5 shot group I shot during load development.”